🚀 Lifetime Access launches soon. Create a free account to grab free models now.

Loading 3D model…

Drag to rotate · scroll to zoom · actual print file

Free Made by humans

Vinyl LP Wall Mount

Printable Wall Mounts for LPs

by TobiasLibera

Materials
PLA
Multicolor
Single color
Supports
None needed

License: CC0 1.0 (Public Domain Dedication)

Commercial use is allowed under this license. Credit the author where required. Learn more

About this model

Long story short, my sister gave two painted LPs.\ So I decided to design a simple wall mount for them. The whole mount can be installed to a wall by using a small nail or a small srew.\ Please mind, the head of the nail or screw shouldn't be thicker than 1.2mm.\ \ Also, you need *1 additional M3x6 screw* to fit the two parts together. Where the thread length is 6mm.\ \ STEP files of the parts are also available, so it should be easy to modify the parts to your needs. Before printing, I recommend to print the *LPW_Test_ScrewHole_M3* part once, to check if you can tighten the M3 screw into the screw hole.\ The nominal diameter of the hole is *2.93mm*, which works good for my printer and my slicer settings. Maybe you need another value to get a good fit. Feel free to modify the STEP files. With my settings, which can be found in the Documentation folder the printing took: Designed by TobiasLibera and shared under CC0 1.0. The ZIP includes every part and the original README.

Part of

More like this