Loading 3D modelā¦
Drag to rotate Ā· scroll to zoom Ā· actual print file
Free Made by humans
Thor DIY Robotic Arm (6-axis)
DIY 3D Printable Robotic Arm
by AngelLM
Create a free account to download
Already have one? Log in
- Materials
- PLA
- Multicolor
- Single color
- Supports
- None needed
License: Creative Commons Attribution-ShareAlike 4.0
Commercial use is allowed under this license. Credit the author where required. Learn more
About this model
⢠𧩠Born Open Source: Designed using open source software such as FreeCAD, KiCAD, GRBL, RRF and ROS. ⢠šļø Released Open Source: All source files published under CC-BY-SA-4.0 license. ⢠š° Low Cost: Hardware cost below 350ā¬. ⢠š Suitable for education: Perfect for robotics courses in schools and universities, there are already success cases! ⢠𧰠G-code Controlled: Uses the same language as 3d printers and CNCs to move. ⢠š³ ROS2 Integration: Available implementation using Docker for flexibility.
⢠`freecad-src` ā Source files of 3D models created with FreeCAD ⢠`mods` ā Modified models and improvements to standard models ⢠`stl` ā Printable STL files ⢠`step` ā STEP files
⢠Thor-ROS: ROS2 & Moveit2 configuration files and packages to work with Thor. ⢠ThorControlPCB: Source & manufacture files of Arduino Mega shield designed to control Thor. ⢠Asgard: Control software for thor motors with a simple interface.
1. Read the Documentation: Comprehensive guides on printing, assembly, electronics, and firmware are available at thor.angel-lm.com/documentation. 2. Print the Parts: Use the STL files in this repository. 3. Get the Hardware: Take a look to the Bill of Materials. 4. Assemble the Robot: See here for assembly videos and interactive instructions. 5. Assemble & Setup the Electronics: The Wiring & Setup guide will help you prepare your electronic board and make the hardware connections. 6. Install the Firmware: Depending on which electronics you have chosen, you will ha
Designed by AngelLM and shared under CC BY-SA 4.0. The ZIP includes every part and the original README.

