🚀 Lifetime Access launches soon. Create a free account to grab free models now.

Loading 3D model…

Drag to rotate · scroll to zoom · actual print file

Free Made by humans

Print-in-Place Draw Latch

Parametric print-in-place over-center draw latch for OpenSCAD, with mount and keeper

by TwinkieXLII

Materials
PLA
Multicolor
Single color
Supports
None needed

License: Creative Commons Attribution-ShareAlike 4.0

Commercial use is allowed under this license. Credit the author where required. Learn more

About this model

A parametric, print-in-place over-center draw latch (toggle / draw-down latch) for OpenSCAD, with a mating keeper and pivot mount so it works as a complete latch-and-strike set. The lever and catch arm print as one piece joined by a captive pin — no assembly. An M3 screw lets the latch pivot on its mount; the catch hook grabs the keeper's cross-bar and the over-center toggle action pulls the two halves tight and holds them. All hardware is M3 (or scale it down to M2, or even pin the hinge with a scrap of 1.75 mm filament). This is a standalone extraction of the "draw" latch from `rugged-box-scad`, itself derived from Stephen Kent's *Customizable and Parametric Rugged Storage Box* (smkent / bulbasaur0). Mount and keeper sit on the two surfaces you want to clamp together, separated by `Latch_Screw_Separation` across the seam. (Already have a molded-in catch on your box? Skip the keeper — see Tuning.) Designed by TwinkieXLII and shared under CC BY-SA 4.0. The ZIP includes every part and the original README.

Part of

More like this