šŸš€ Lifetime Access launches soon. Create a free account to grab free models now.

Loading 3D model…

Drag to rotate Ā· scroll to zoom Ā· actual print file

Free Made by humans

Humane Bird & Cat Deterrent Spikes

A strip of blunt cones that keeps birds and cats off railings, fences and windowsills without hurting them. Print in TPU or PETG and zip-tie it on.

by andrewfraley

Materials
PLA
Multicolor
Single color
Supports
None needed

License: Creative Commons Attribution-ShareAlike 4.0

Commercial use is allowed under this license. Credit the author where required. Learn more

About this model

A customizable OpenSCAD model of a cone-studded strip that keeps birds, cats and other animals off railings, fence tops, ledges and windowsills. Print it in TPU for a flexible strip, or in PETG or ASA for a rigid one, then zip-tie it in place. You don't need screws, glue or holes. Unlike traditional bird spikes, the cones are blunt. They make a surface uncomfortable to land or walk on without injuring the animal. The idea is the same as a "scat mat". • Fully parametric. Every dimension is adjustable in the OpenSCAD Customizer or with `-D` on the command line. • Auto layout. You set the pitch and the strip size, and the cone count is calculated for you. The rows are centered, the margins are even, and no cone is ever cut off. • Zip-tie lanes. Cone-free bands run across the strip at regular intervals, with a shallow groove in the base so the tie can't slide. • Tiling for long runs. You can split a long run into bed-sized pieces that line up end to end. • Printer friendly. Prints base down with no supports, and the rounded base corners help reduce curling. • Single manifold solid. It slices cleanly with no repairs needed. 1. Install OpenSCAD (2021.01 or newer). 2. Open `deterrent_spikes.scad`. 3. Show the Customizer if it's hidden. In 2021.01, open the Window menu and uncheck "Hide Customizer". 4. Set `strip_width` to just under the width of the surface you're protecting. Set `strip_length` to the total run you need. 5. Press F6 to render, then use File → Export → Export as S Designed by andrewfraley in OpenSCAD and shared under CC BY-SA 4.0. Trove3D rendered the ready-to-print STL files from the original source; the ZIP also includes every .scad file unchanged, so you can tweak the parameters yourself.

Part of

More like this