🚀 Lifetime Access launches soon. Create a free account to grab free models now.

Loading 3D model…

Drag to rotate · scroll to zoom · actual print file

Free Made by humans

Delta Robot Arm Desk Toy

A small, satisfying model of a delta-style robot arm that moves on three skate bearings. A quick print and a great engineering desk toy.

by Scopeuk

Materials
PLA
Multicolor
Single color
Supports
None needed

License: CC0 1.0 (Public Domain Dedication)

Commercial use is allowed under this license. Credit the author where required. Learn more

About this model

This is a quick and basic openscad model, it's small and quick to print, it requires three non-printed parts (skate/608 bearings) All printed parts should print in the openscad export orientation without supports 1. Place bearings into the big hole on the bottom of each shoulder 2. Assemble an arm by plassing two segments together and connecting with a pin, the pin should go into a hole with a chamfer in the first part and through to a hole without a chamfer, all chamfers should face outwards 3. Place a pin through the chamfered hole in the wrist and into the hole on the top arm, note the wrist will sit above the other arm section, if the wrist would be upside down rotate the arm 180 degrees 4. Place a pin through the chamfered hole in the bottom of the arm and into the hole in the shoulder, note that the seam between the arm and shoulder should be centered 5. Repeat this for the other two arms 6. Place three pins through the tool part and into the bottom side of each wrist 7. Sit the assembly on top of the base (one shoulder onto each pin) • The tolerance on the bearings is a little loose, the first version has a small piece of electrical tape over each peg and on the edge of each bearing to tighten it up • new pinned joints are a big improvement but they are quite stiff to install, I used a small trigger clamp Designed by Scopeuk in OpenSCAD and shared under CC0 1.0. Trove3D rendered the ready-to-print STL files from the original source; the ZIP also includes every .scad file unchanged, so you can tweak the parameters yourself.

Part of

More like this