šŸš€ Lifetime Access launches soon. Create a free account to grab free models now.

Loading 3D model…

Drag to rotate Ā· scroll to zoom Ā· actual print file

Free Made by humans

Christmas Star Gift Box

Open-source christmas star gift box you can print at home.

by ranaur

Materials
PLA
Multicolor
Single color
Supports
None needed

License: CC0 1.0 (Public Domain Dedication)

Commercial use is allowed under this license. Credit the author where required. Learn more

About this model

A 3D-printable Christmas star tree topper that doubles as a small box. Designed in OpenSCAD — fully parametric, all dimensions can be tweaked at the top of each `star_box_*.scad` file. There are 4 versions: Flat vs. Pyramid, and Default vs. Middle: • Flat (`star_box_flat*.scad`) — the box has flat front and back faces. • Pyramid (`star_box_pyramid*.scad`) — each half rises to a peak in the middle (classic 3D star look), sitting on a small straight rim (`rim_h`, default 5 mm) that carries the snap fit. • Default (`star_box_flat.scad`, `star_box_pyramid.scad`) — the star's bottom point sinks into a star-shaped socket in the base. • Middle (`star_box_flat_middle.scad`, `star_box_pyramid_middle.scad`) — a round mounting shaft between the two bottom star points inserts into a round socket in the base. • The front and back are star-shaped half-shells that snap together to close the box (snap ridge/tongue on the back clicks into a groove in the front, `clearance` = 0.25 mm). • The conic base slides over the tip of the tree from below and locks the two halves together — via the bottom star point (default versions) or the mounting shaft (middle versions). • In the middle versions each half carries a half-round shaft in the valley between the two bottom points; when the halves snap together they form a round shaft. Designed by ranaur and shared under CC0 1.0. The ZIP includes every part and the original README.

Part of

More like this