🚀 Trove Pass launches soon. Create a free account to grab free models now.

Loading 3D model…

Drag to rotate · scroll to zoom · actual print file

Free Made by humans

Chain Open Aid

Tool to keep bicycle chains together while installing or removing master link

by Alexander Thomas (DrLex)

Materials
PLA
Multicolor
Single color
Supports
None needed

License: Creative Commons Attribution 4.0

Commercial use is allowed under this license. Credit the author where required. Learn more

About this model

*A 3D printable tool to keep bicycle chains together while installing or removing their master link* This is a simple tool that makes it easier to mount or remove bicycle chains with a master link or KTC ‘missinglink’ or similar system. Without this tool, one sort of needs 3 hands to pull the two ends of the chain together and then insert the link, which can be especially tricky when having to fight the spring action of a derailleur. This tool makes it easy to hook the two ends of the chain together and then insert or remove the link. The two ends of the tool can slide up to 5 mm w.r.t. each other, such that the link can be opened or closed while the tool is mounted. In case you were wondering: no, you don't need different widths of this tool for different widths of derailleur chains. Even though their outside width varies, the width between inner plates is the same for a 6-speed chain as for an 11-speed chain: 3/32 inch or 2.4 mm. The tool is 2 mm thick to fit easily even when the chain is caked with dirt. Only in case you're going to use this on a single-speed chain, you could consider scaling it up in the Z axis to make it wider, but that shouldn't be necessary. Designed by Alexander Thomas (DrLex) and shared under CC BY 4.0. The ZIP includes every part, the original README and the license.

Part of

More like this