🚀 Lifetime Access launches soon. Create a free account to grab free models now.
← All guides

Projects · 5 min read

Printing terrain and space models: craters, asteroids, and spacecraft

How to orient, scale, support, assemble, and paint Moon and Mars terrain, asteroids, and spacecraft models on an FDM printer.

Space models are some of the most rewarding things you can print. Many of the files in our free Space Lab collection come from NASA 3D Resources, which are in the public domain. (NASA does not endorse Trove3D; we simply host those files with credit.) Here is how to get them off your FDM printer looking their best.

Terrain tiles: Moon and Mars surfaces

Terrain files are usually height maps turned into solid tiles. They have a flat bottom and a detailed top surface, which makes them friendly to print, as long as you orient and slice them thoughtfully.

Orientation. Print terrain flat-side down. The bottom sits on the plate, the craters face up, and you need no supports at all. It is tempting to stand a tile on edge to get finer detail on the surface, but that brings tall supports, wobble, and a much longer print. Flat is almost always the right call.

Layer height. This is where terrain gets interesting. Because the surface is a gentle landscape of slopes, layer lines show up as contour rings, a bit like a topographic map. Some people love that look. If you want a smoother surface, drop to 0.12 mm or even 0.08 mm layers. Bambu Studio and OrcaSlicer also offer variable layer height, which uses thin layers only where the slope is shallow. That keeps print time reasonable while smoothing out the gentle rims of craters.

Scaling. Real terrain data is often vertically subtle. If a Mars tile looks flat after slicing, you can scale only the Z axis (unlock uniform scaling in your slicer) by 150 to 200 percent to exaggerate the relief. Planetary maps do this all the time, and it makes shadows much more dramatic. Just be aware that you are no longer printing true proportions, which matters if you are making a teaching model.

Infill. Terrain tiles are mostly solid volume under a thin skin. Ten to fifteen percent infill with three or four walls and five or six top layers works well. Fewer top layers can let infill pattern show through on the flat areas between craters.

Asteroids and irregular rocks

Asteroid models are blobs with no flat side, which is the main challenge.

  • Cut a flat base. The easiest fix is to use your slicer's cut tool to slice a few millimeters off the bottom. You lose a tiny bit of rock you will never see, and you gain a stable print with no supports underneath.
  • Or split it in half. For a full display piece, cut the asteroid into two halves along its widest point, print both flat-side down, and glue them together. Add a small hole in each half if you want to pin it to a stand with a piece of wire or a toothpick.
  • Use tree supports if you must print it whole. Organic or tree supports touch the surface at fewer points and peel away more cleanly from bumpy shapes than grid supports.

Spacecraft models

Spacecraft files bring thin antennas, solar panels, and booms. Many NASA spacecraft models were made for visualization, not printing, so they may need a little help.

Check the scale first. Decide on a display size, then check that the thinnest parts are at least 0.8 to 1 mm thick. Anything thinner may vanish in the slicer preview, so scroll through it layer by layer before printing.

Split into parts. A spacecraft printed in one piece usually needs a forest of supports under panels and dishes. Splitting it is cleaner:

  1. Print the main body upright, on its flattest face.
  2. Print solar panels and flat arrays lying flat on the plate. They come out crisp and strong.
  3. Print dishes bowl-side up if possible, or with the rim on the plate.
  4. Print antennas and booms lying down so the layers run along their length, which makes them much less likely to snap.

If the file is a single mesh, your slicer's cut tool can add connectors (pegs or dowels) when it splits a model. That makes alignment during assembly much easier.

Assembly. Thick CA glue (superglue gel) works well for PLA and PETG parts. Dry-fit everything before gluing, and lightly sand mating surfaces for better grip. For thin booms, consider replacing the printed part with brass rod or a straightened paper clip. It is a classic model-maker's trick and survives handling far better.

Painting and finishing

You can print space models in a single gray filament and get great results with a little paint.

Prime first. A light coat of gray or black spray primer hides layer lines visually and gives paint something to grip.

Dry-brushing terrain. This is the technique that makes crater tiles come alive:

  1. Base-coat the tile dark gray or black.
  2. Load a wide, stiff brush with light gray paint, then wipe almost all of it off on a paper towel.
  3. Sweep the nearly dry brush lightly across the surface. Paint catches only the raised edges, crater rims, and ridges.
  4. Repeat with a lighter shade, using even less paint, for the very highest points.

For Mars, swap the grays for a dark rust base with orange and tan dry-brush layers. For an asteroid, try warm browns and grays.

Spacecraft details. Metallic silver and gold paints, or gold foil tape, give a convincing look to insulation blankets and fittings. A matte clear coat at the end ties everything together and stops shiny spots where you handled the model.

Putting it together

Flat orientation for terrain, a cut base for asteroids, and smart part splits for spacecraft: that covers most of it. Start with a small crater tile from Space Lab in our Open Library and try a dry-brush pass. More guides are waiting in Learn.

Want models that are already set up for your printer?

Every Trove3D file ships with a tested 3MF profile. Start with three free ones.

Get the Free Starter Pack