🚀 Trove Pass launches soon. Create a free account to grab free models now.
← All guides

Getting started · 6 min read

Your first print on a Bambu Lab printer

A calm, step-by-step walkthrough from unboxing checks to pulling your first finished model off the plate.

Bambu Lab printers are known for working well out of the box, but a few minutes of setup and a sensible first model make the difference between a confident start and a frustrating one. This guide walks you through the whole process, from a fresh printer to a finished print, using one of our Bambu-ready 3MF files.

Before you start

Make sure you have:

  • Your printer unpacked, with all transport screws and foam removed (check the quick-start guide that came in the box, since this varies by model).
  • A spool of PLA. It is the most forgiving material, and every Bambu Lab printer handles it well.
  • Bambu Studio installed on your computer, or the Bambu Handy app on your phone.
  • A Bambu Lab account, if you want to print over the cloud. You can also print over your local network or from a microSD card.

Step 1: Run the initial calibration

When you first power on the printer, it will guide you through setup on its screen. Let it run the full calibration. Depending on your model, this includes:

  • Bed leveling, which maps the surface of the build plate so the nozzle stays at the right height everywhere.
  • Vibration compensation, which measures how the frame resonates so the printer can move quickly without ringing artifacts.
  • Motor noise cancellation, on models that support it.

This takes roughly 15 to 20 minutes. Do not skip it. A good calibration is the foundation for every print that follows.

Step 2: Connect the printer

Follow the on-screen prompts to join your Wi-Fi network, then bind the printer to your account in Bambu Handy or Bambu Studio. Once connected, Bambu Studio will show your printer in the Device tab, including camera view (if your model has one), temperatures, and print progress.

If you prefer not to use the cloud, you can enable LAN-only mode in the printer settings, or simply save sliced files to a microSD card.

Step 3: Prepare the build plate

The build plate is where most first-print problems start, so treat it with care:

  • Wash it. Fingerprints leave oils that stop plastic from sticking. Wash the plate with warm water and a few drops of dish soap, rinse well, and dry it with a clean paper towel. Avoid touching the print surface afterward.
  • Know your plate type. Textured PEI plates work well with PLA and PETG without any adhesive. Smooth PEI and Cool Plate surfaces may benefit from a thin layer of glue stick, especially for PETG, which can bond too strongly to smooth PEI.
  • Seat it properly. Place the plate on the magnetic bed so it lines up with the rear alignment pins and lies completely flat.

Step 4: Load filament

If you have an AMS, insert the filament into a slot until the feeder grabs it. The AMS will usually read the filament type and color automatically if you use a Bambu spool with an RFID tag. For other spools, set the type and color manually on the printer screen or in Bambu Studio.

Without an AMS, feed filament through the external spool holder and use the Load function on the printer screen. Wait until filament flows cleanly from the nozzle.

Always set the correct filament type. The printer uses it to choose temperatures and flow settings, and a mismatch is a common cause of poor prints.

Step 5: Open a 3MF file in Bambu Studio

Our Bambu-ready 3MF files include the model already arranged on the plate, with print settings we tested. To use one:

  1. Download the 3MF from your Trove3D library.
  2. Open Bambu Studio and choose File > Open Project, or drag the file into the window.
  3. If Bambu Studio asks whether to load the settings from the file, choose to load them. This keeps our tested profile.
  4. Check the printer selector at the top left matches your machine and nozzle size (0.4 mm is the default on most models).
  5. Check the plate type matches the plate you installed.
  6. Confirm the filament slots match what is loaded.

For a first print, pick something small and simple, such as a calibration piece or a small decorative model from the Starter Pack. A short print that takes under an hour lets you learn the workflow without waiting all afternoon.

Step 6: Slice and send

Click Slice plate. Bambu Studio will show a preview with the estimated print time and filament use. Use the layer slider on the right to scroll through the layers and check that the first layer looks complete and that supports appear where you expect them.

When it looks right, click Print plate. In the dialog, you can choose whether to run bed leveling before the print. Leaving it on is a good habit, especially early on. Then send the job.

Step 7: Watch the first layer

Stay near the printer for the first few minutes. The first layer tells you almost everything:

  • Lines should be slightly flattened and touching each other, with no gaps.
  • The plastic should stick firmly, without curling at the corners.
  • The nozzle should not scrape or plow through the plastic.

If the first layer looks rough, gappy, or is not sticking, stop the print, clean the plate again, and check that the filament type and plate type are set correctly. Our first-layer troubleshooting guide covers this in more detail.

Step 8: Remove the print

When the print finishes, let the bed cool for a few minutes. Then remove the magnetic plate and flex it gently. Most PLA prints pop right off once the plate is cool. Avoid using metal scrapers on PEI surfaces, since they can gouge the coating.

Tips for your next prints

  • Keep filament dry. Moisture causes stringing, popping sounds, and weak parts. Store spools in a sealed bag or box with desiccant.
  • Clean the plate regularly. A quick wash every few prints keeps adhesion reliable.
  • Use the tested profile first. Our files ship with settings that worked on our test prints. Start there, then tweak if needed.

Your first successful print is a great moment. From here, you can explore multicolor printing with the AMS, try PETG for functional parts, and dig into the Monthly Drop. Happy printing.

Want models that are already set up for your printer?

Every Trove3D file ships with a tested 3MF profile. Start with three free ones.

Get the Free Starter Pack